Vessels for High Flow 
Filter Media Specifications
Elements
 Media type C or QAvailable in grades 4, 6 or 10 Air Flow: Inside to Outside |
|||
| This coalescing element is composed of an outer layer epoxy saturated, borosilicate glass micro-fi ber tube. Type Q has a pleated cellulose inner layer as a built-in prefilter. This element is metal retained for added strength, and includes a synthetic fabric safety layer. Grade 4 fi lters are very high efficiency coalescers. They are used for elevated pressures or lighter weight gases. Grade 6 fi lters are used when “total removal of liquid aerosols and suspended fi nes” is required. Because of its overall performance characteristics, this grade is most often recommended. Grade 10 filters are used as prefilters for grade 6 to remove gross amounts of liquid aerosols or tenacious aerosols which are difficult to drain. | |||
 |
 |
 |
 |
| Media type 7CVP
Air Flow: Inside to Outside Finite’s 7CVP media consists of two layers. The outer layer consists of a dense matrix of glass fi bers. This coalescing layer provides highly effi cient aerosol removal and very low pressure drop. The inner layer effectively traps dirt particles, protecting and extending the life of the outer layer. A metal retainer in this element is used for strength and stability. This media is used in bulk coalescing applications and when relatively high effi ciency and low pressure drop are required. |
Media type 3P
Air Flow: Outside to Inside 3P Particulate interceptor elements are used where very high dirt holding capacity and relatively fi ne pore structure are required. This pleated element is constructed of pleated cellulose with a 3 micron rating. |
Media type 100WS
Air Flow: Inside to Outside This rolled stainless steel mesh element has two metal retainers with rolled mesh steel in between. It is an extremely robust design. This media is used for the reduction and elimination of excess liquids in gas streams. Excellent prefi ltration for coalescing grades 6 and 10 when extreme quantities of liquid contaminants are present. |
Par-Fit Conversion
Elements - Over 2000 competitor interchanges available - Custom element designs to fi t your OEM requirements - Special UNI-CAST design - Coalescing, particulate and adsorption elements available - High effi ciency fi ltration, low operating costs, long life, high quality |
| Finite® Media Specifications | |||||
| Grade Designation |
Coalescing Effi ciency .3 to .6 Micron Particles |
Maximum Oil Carryover1 PPM w/w |
Micron Rating |
Pressure Drop (PSID) @ Rated Flow2 |
|
| Media Dry |
Media Wet With 10-20 wt. oi |
||||
| 4 | 99.995% | .003 | .01 | 1.25 | 3-4 |
| 6 | 99.97% | .008 | .01 | 1.0 | 2-3 |
| 7 | 99.5% | .09 | .5 | 0.25 | 0.5 - 0.7 |
| 10 | 95% | .85 | 1.0 | 0.5 | 0.5 |
| 100WS | N/A | N/A | 100 | <0.25 | 0.25 |
| 3P | N/A | N/A | 3.0 | 0.25 | N/A |
2Add dry + wet for total pressure drop.