Media type C or Q
Available in grades 6, 8 or 10
Air Flow: Inside to Outside
This coalescing element is
composed of an epoxy saturated,
borosilicate glass micro-fiber
tube. Type Q has a pleated
cellulose inner layer as a built-in
prefilter. This element is metal
retained for added strength, and
includes a synthetic fabric layer
to aid in draining liquids away
from the coalescing layer.
Media type Q is shown here.
Media type C has the same
coalescing outer layer, without
the inner pleated layer. |
Media type D
Available in grades 6, 8 or 10
Air Flow: Inside to Outside
The type D element is composed
of a binderless micro-glass
coalescer layer surrounded
by two metal retainers. These
metal retainers, coupled with a
glass drain layer and an outer
perforated metal handling
layer, make this a robust
element designed to handle high
temperatures.
This element is typically used as
a high temperature coalescer,
or the particulate afterfilter for
a heated regenerative desiccant
dryer. |
Media type ME
Air Flow: Inside to Outside
Finite's Mist Eliminator (ME) media
consists of two filtration layers
pleated together. The outer layer
consists of a dense matrix of glass
fibers. This coalescing layer provides
highly efficient aerosol removal and
very low pressure drop. The inner
layer effectively traps dirt particles,
protecting and extending the life of
the outer layer. This element is metal
retained for added strength, and
includes a synthetic fabric layer to
aid in draining liquids away from the
coalescing layer.
The Finite ME element maintains it’s
high efficiency rating even at low flow
rates, allowing the user to specify
Finite housings that are oversized for
the application, greatly extending the
life of the element. Due to the stainless
steel components used in the ME
element, it is ideally suited for long life
service or corrosive environments.
Type ME elements are great prefilters
for all types of air dryers. This element
maintains dryer efficiency by removing
oil before it damages costly desiccant
or membranes. It also protects
refrigerated dryers by preventing
coating of coils with oil or varnish. |
Media type 7CVP
Air Flow: Inside to Outside
Finite’s 7CVP media consists of two
layers. The outer layer consists of
a dense matrix of glass fibers. This
coalescing layer provides highly
efficient aerosol removal and very
low pressure drop. The inner layer
effectively traps dirt particles,
protecting and extending the life
of the outer layer. This element is
metal retained for added strength,
and includes a synthetic fabric layer
to aid in draining liquids away from
the coalescing layer.
This media is used in bulk coalescing
applications and when relatively high
efficiency and low pressure drop are
required.
Type 7CVP elements are great
prefilters for refrigerated air
dryers, where low differential
pressure is a requirement. This
element maintains dryer efficiency
by preventing the coating of heat
exchanger coils with oil and varnish.
For a high temperature version of
this element, specify type 7DVP. |
Vessels for High Flow 
